Cisco Systems 32369 client-name name no client-name, host ip dhcp pool, Syntax Description

client-name

client-name

To specify the name of a Dynamic Host Configuration Protocol (DHCP) client, use the client-nameDHCP pool configuration command. The client name should not include the domain name. Use the no form of this command to remove the client name.

client-name name no client-name

Syntax Description

name	Specifies the client’s name, using any standard ASCII character. The
	client name should not include the domain name. For example, the
	name mars should not be specified as mars.cisco.com.

Defaults

None

Command Modes

DHCP pool configuration

Usage Guidelines

This command first appeared in Cisco IOS Release 12.0(1)T.

Examples

The following example specifies a string client1 that will be the name of the client:

client-name client1

Related Commands

host

ip dhcp pool

Cisco IOS DHCP Server 19