Cisco Systems 32369 show ip dhcp database url, Syntax Description, Defaults, Command Modes

Command Reference

show ip dhcp database

To display Cisco IOS Dynamic Host Configuration Protocol (DHCP) Server database agent information, use the show ip dhcp database Privileged EXEC command.

show ip dhcp database [url]

Syntax Description

url	(Optional) Specifies the remote file used to store automatic DHCP
	bindings. Following are the acceptable URL file formats:
	•	tftp://host/filename
	•	ftp://user:password@host/filename
	•	rcp://user@host/filename

Defaults

If a URL is not specified, all database agent records are shown. Otherwise, only information about the specified agent is displayed.

Command Modes

Privileged EXEC

Usage Guidelines

This command first appeared in Cisco IOS Release 12.0(1)T.

Examples

The following example shows all DHCP server database agent information. Table 4 lists descriptions for each field in the example.

Router# show ip dhcp database

URL	:	ftp://user:password@172.16.4.253/router-dhcp
Read	:	Dec 01 1997		12:01 AM
Written	:	Never
Status	:	Last read succeeded. Bindings have been loaded in RAM.
Delay	:	300	seconds
Timeout	:	300	seconds
Failures	:	0
Successes	:	1

Table 4	show ip dhcp database Field Descriptions
Field	Description
URL	Specifies the remote file used to store automatic DHCP
	bindings. Following are the acceptable URL file formats:
	•	tftp://host/filename
	•	ftp://user:password@host/filename
	•	rcp://user@host/filename

46Release 12.0(1)T