Chapter 3 Basic Configuration

Before You Start

Before You Start

Before configuring the access point, ask your network administrator for the following information:

•The service set identifier (SSID) for the access point.

•A system name for the access point. The name should describe the location or principal users of the access point.

•If your network does not use DHCP to assign IP addresses, you will need an IP address for the access point.

•If your network uses subnets, you will need a default gateway and an IP subnet mask for the access point.

•The access point’s MAC address, which is printed on the label on the bottom of the access point.

Summary of Configuration Steps

You use the Express Setup page to assign basic settings to the access point. For instructions on setting up security, filtering, and other access point features, consult the Cisco Aironet Access Point Software Configuration Guide on the access point CD.

You will follow these steps to enter the access point’s basic settings:

1.Connect the access point as described in the Quick Start Guide: Cisco Aironet Access Points.

2.Use an Internet browser to open the access point’s management system by browsing to the access point’s IP address. If your network uses a DHCP server, use the IP Setup Utility (IPSU) to find the access point’s DHCP-assigned IP address. The “Using the IP Setup Utility” section on page 3-2describes how to use IPSU.

You can also use a nine-pin, straight-through, male-to-female serial cable to connect your computer’s COM1 or COM2 port to the serial port on the back of the access point and use a terminal emulator to open the management system. The “Using a Terminal Emulator” section on page 3-7describes using a terminal emulator to assign basic settings.

3.Enter basic settings on the Express Setup page.

Using the IP Setup Utility

The IP Setup utility (IPSU) allows you to find the access point’s IP address when it has been assigned by a DHCP server. You can also use IPSU to set the access point’s IP address and SSID if they have not been changed from the default settings.

Note IPSU can be used only on the following operating systems: Windows 95, 98, NT, 2000, ME, or XP. For other operating systems, you must use the access point console port and a terminal emulator program to configure the access point.

The sections below explain how to install the utility, how to use it to find the access point’s IP address, and how to use it to set the IP address and the SSID.

Cisco Aironet Access Point Hardware Installation Guide

3-2

OL-0738-02

 

 

Page 33 Page 35
Page 34
Image 34
Cisco Systems 350, 340 manual Before You Start, Summary of Configuration Steps, Using the IP Setup Utility
Page 33 Page 35

340, 350 specifications

Cisco Systems has long been a prominent player in the realm of networking and communications technology. Among its comprehensive product lineup, the Cisco 350 and 340 series of switches stand out as reliable solutions for businesses looking to enhance their network performance.

The Cisco 350 series, often referred to for its accessibility and performance, is designed for small to medium-sized enterprises. It offers a versatile set of features that cater to various networking needs. Key characteristics include a range of models supporting 10/100/1000 Mbps Ethernet ports, which allow for high-speed connectivity. The series also supports PoE (Power over Ethernet) capabilities, enabling devices such as IP phones and wireless access points to receive power directly through the network connection. This not only simplifies deployment but also minimizes the need for additional power supplies.

Cisco's Intelligent Prosumer Networking features are incorporated into the 350 series, enabling enhanced security and management capabilities. The switches provide Layer 2 and Layer 3 functionality for routing and switching, allowing users to segment their networks efficiently and reduce broadcast traffic. Additionally, Quality of Service (QoS) features prioritize critical applications, ensuring a smooth user experience without interruptions.

On the other side, the Cisco 340 series builds on similar performance foundations but targets environments requiring even more robust capabilities. It includes advanced features such as StackWise technology, which provides scalability and redundancy. This allows multiple switches to operate as a single unit, improving network resilience and simplifying management.

Both the 350 and 340 series incorporate Cisco's Smart Group technology, facilitating streamlined configuration and easier monitoring of network performance. Furthermore, with Cisco DNA (Digital Network Architecture) capabilities, these switches can support automation and insights through analytics, enabling IT teams to respond rapidly to network demands.

In terms of security, both series are equipped with advanced features that prevent unauthorized access and support secure management protocols. They include features like Access Control Lists (ACLs) and storm control, further protecting network integrity.

Overall, whether you opt for the Cisco 350 or 340 series, you will benefit from a robust set of features designed for modern networking challenges, along with the innovation and reliability that Cisco Systems is known for. These switches provide scalable, efficient, and secure solutions to support business growth and operational efficiency.
Top Page Image Contents