Technical Specifications

Performance

10-Gbps switching fabric

4.8 million PPS wire-speed forwarding rate for 64-byte packets (Catalyst 3512 XL), 6.5 million PPS wire-speed forwarding rate for 64-byte packets (Catalyst 3524 XL)

5 Gbps maximum forwarding bandwidth

4-MB memory architecture shared by all ports

Packet forwarding rate for 64-byte packets:

14,880 PPS to 10-Mbps ports

148,800 PPS to 100BaseT ports

1,488,000 PPS to 1000BaseX ports

8-MB DRAM and 4-MB Flash memory

8192 MAC addresses

Management

SNMP Management Information Base (MIB) II, SNMP MIB extensions, Bridging MIB (RFC 1493)

Standards

IEEE 802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseX ports

IEEE 802.1D Spanning-Tree Protocol

IEEE 802.1Q VLAN

IEEE 802.3z 1000BaseX specification

1000BaseX (GBIC)

1000BaseSX

1000BaseLX/LH

IEEE 802.3u 100BaseTX specification

IEEE 802.3 10BaseT specification

Y2K

• Y2K compliant

Connectors and Cabling

10BaseT ports: RJ-45 connectors; two-pair category 3, 4, or 5 unshielded twisted-pair (UTP) cabling

100BaseTX ports: RJ-45 connectors; two-pair Category 5 UTP cabling

1000BaseX GBIC ports: SC fiber connectors, single mode or multimode fiber

GigaStack GBIC ports: copper-based Cisco GigaStack cabling

Management console port: RJ-45 connector, RS-232 serial cabling

Indicators

Per-port status LEDs—link integrity, disabled, activity, speed, and full-duplex indications

System status LEDs—system, RPS, and bandwidth utilization indications

Dimensions and Weight (H x W x D)

1.75 x 17.5 x 11.8 in (4.4 x 44.5 x 30 cm)

One rack high

10.25 lb (4.6 kg)

Environmental Conditions and Power Requirements

Operating temperature: 32 to 113 F (0 to 45 C)

Storage temperature: –4 to 149 F (–20 to 65 C)

Operating relative humidity: 10 to 85% noncondensing

Operating altitude: Up to 10,000 ft (3000 m)

Power consumption: 70W maximum; 239 BTU per hour

AC input voltage/frequency: 100 to 120/200 to 240 VAC (autoranging) 50 to 60 Hz

MTBF 150,000 hours

Safety Certifications

UL 1950

CSA 22.2 No. 950

EN 60950

IEC 950

AS/NZS 3260, TS001

CE

Electromagnetic Emissions Certifications

FCC Part 15 Class A

EN 55022B Class A (CISPR 22 Class A)

VCCI Class A

AS/NZS 3548 Class A

BCIQ

CE Marking

Warranty

• Lifetime limited warranty

Page 5
Image 5
Cisco Systems 3524 XL, 3512 XL manual Technical Specifications

3524 XL, 3512 XL specifications

Cisco Systems has long been a leader in networking technology, and the Catalyst 3524 XL and 3512 XL switches exemplify the company’s commitment to providing high-performance, scalable solutions for businesses. These devices, part of the Catalyst 2900 series, are known for their robust features, catering to the needs of both enterprise and small office environments.

The Cisco Catalyst 3524 XL switch offers twenty-four 10/100 Mbps Ethernet ports, allowing for fast data transmission and efficient handling of network traffic. One of the standout features of the 3524 XL is its ability to support Power over Ethernet (PoE), which simplifies the deployment of devices such as IP phones and wireless access points by delivering power through the Ethernet cable. With a switching capacity of up to 8.8 Gbps, it ensures minimal congestion and high performance, making it an ideal choice for organizations looking to enhance their network infrastructure.

In contrast, the Cisco Catalyst 3512 XL switch is a more compact option, offering twelve 10/100 Mbps Ethernet ports. This model is particularly suited for small networks that do not require the extensive port density of larger switches. The 3512 XL benefits from similar technologies as its larger counterpart, including support for fast Ethernet and the ability to handle multiple network protocols effectively, ensuring seamless integration into existing systems.

Both the 3524 XL and 3512 XL switches support a range of advanced networking features, such as VLAN (Virtual Local Area Network) support, which enables network segmentation for improved security and performance. Additionally, they incorporate Cisco's own Quality of Service (QoS) technology, which prioritizes traffic flow and ensures that critical applications receive the necessary bandwidth.

Another key characteristic shared by both models is their reliability and ease of management. The switches are designed to be user-friendly, featuring an intuitive interface and support for SNMP (Simple Network Management Protocol), which allows network administrators to monitor performance and manage devices efficiently.

Overall, Cisco's Catalyst 3524 XL and 3512 XL switches provide organizations with essential features and technologies that support a robust, scalable networking environment. Their combination of performance, power management capability, and advanced networking features makes them valuable assets for businesses looking to build a reliable and efficient network infrastructure.