Cisco Systems 3600

V.110 Support for Cisco 3600 Series Digital Modems

show modem

Cisco IOS Release 12.1(5)T

Modem config Current modem configuration, which includes the fields Incoming,

Outgoing, Incoming and Outgoing, and Unknown.

Protocol Protocol the modem is running such as Normal, Direct, reliable/MNP4, and

reliable/LAPM (Link Access Procedure for Modems).

Compression Compression algorithm running on the modem, such as None, V42bis, and

MNP5.

Management config Indicates if the modem is configured for out-of-band feature polling.

TX signals Transmit signal levels. For modulations that do not support signal-to-noise

calculations, the ratio is 0.

RX signals Transmit signal levels.

Last clearing of “show

modem” counters

Last time the modem counters were cleared using the clear modem

counters command. A summary of modem events also appears:

•Incoming completes and failures—Total number of incoming

connection requests that the modem answered and successfully or

unsuccessfully connected with the remote DCE device.

•Outgoing completes and failures—Total number of outgoing

connection requests that the modem dialed and successfully or

unsuccessfully connected with the remote DCE device.

•Failed dial attempts—Number of times the modem attempted to dial

out but the call failed to leave the modem.

•Ring no answers—Number of times the integrated modem detected

ringing but did not answer the incoming call.

•Busied outs—Number of times the integrated modem was intentionally

taken out of service (for example, the modem busyout command was

enabled on the modem).

•No dial tones—Number of times the dial-out attempt failed because the

modem failed to detect a dial tone.

•Dial timeouts—Number of times the modem has timed out while

attempting to dial.

•Watchdog timeouts—Number of times the modem internal watchdog

timer has expired.

•No carriers—Number of times the modem disconnected because no

carrier was present.

•Link failures—Number of times the modem has detected a link failure.

•Resets—Number of times the modem has been reset.

•recover oob—Number of times the out-of-band feature has been

cleared and reinitialized.

•Protocol timeouts and errors—Number of times the modem protocol

failed to make a call connection.

•Lost events—Number of incomplete modem events performed by the

modem.

Transmit Speed

Counters

List of connection speeds that were sent by the modem.

Field Description