begin
!
# ***** NON−DEFAULT CONFIGURATION *****
!
!
#time: Fri Jun 30 1995, 05:04:47
!
#version 6.3(10)
!
!
#system web interface version(s)
!
#test
!
#system
set system name Cat2948G
!
#frame distribution method
set port channel all distribution mac both
!
#vtp
!−−− VTP domain is configured to be that same as the 3550 (VTP server).
set vtp domain cisco
!−−− VTP mode is chosen as client for this switch.
set vtp mode client
!
#ip
!−−− The management IP address is configured in VLAN 10.
set interface sc0 10 10.1.10.3/255.255.255.0 10.1.10.255
set interface sl0 down
set interface me1 down
!−−− The default route is defined so that the switch is reachable.
set ip route 0.0.0.0/0.0.0.0 10.1.10.1
!
#set boot command
set boot config−register 0x2
set boot system flash bootflash:cat4000.6−3−10.bin
!
#module 1 : 0−port Switching Supervisor
!
#module 2 : 50−port 10/100/1000 Ethernet
!−−− Host_2 and SERVER_3 ports are configured in respective VLANs.
set vlan 2 2/2
set vlan 3 2/23
set port name 2/2 To HOST_2
set port name 2/23 to SERVER_3
!−−− Trunk is configured to 3750 with dot1q encapsulation.
set trunk 2/49 desirable dot1q 1−1005
end
Cisco − Configuring Inter−VLAN Routing with Catalyst 3750 Series Switches in a Stacked Configuration