Cisco Systems 3750 Catalyst 2950 show vtp status, , show interfaces trunk, , Catalyst 2948G show vtp domain,

E1 − OSPF external type 1, E2 − OSPF external type 2, E − EGP
i − IS−IS, L1 − IS−IS level−1, L2 − IS−IS level−2, ia − IS−IS inter area
* − candidate default, U − per−user static route, o − ODR
P − periodic downloaded static route
Gateway of last resort is 200.1.1.2 to network 0.0.0.0
200.1.1.0/30 is subnetted, 1 subnets
C 200.1.1.0 is directly connected, GigabitEthernet1/0/10
10.0.0.0/24 is subnetted, 3 subnets
C 10.1.10.0 is directly connected, Vlan10
C 10.1.3.0 is directly connected, Vlan3
C 10.1.2.0 is directly connected, Vlan2
S* 0.0.0.0/0 [1/0] via 200.1.1.2
Catalyst 2950
show vtp status
Cat2950#show vtp status
VTP Version : 2
Configuration Revision : 3
Maximum VLANs supported locally : 250
Number of existing VLANs : 8
VTP Operating Mode : Client
VTP Domain Name : cisco
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x54 0xC0 0x4A 0xCE 0x47 0x25 0x0B 0x49
Configuration last modified by 200.1.1.1 at 3−1−93 01:06:24
•
show interfaces trunk
Cat2950#show interfaces trunk
Port Mode Encapsulation Status Native vlan
Gi0/1 desirable 802.1q trunking 1
Port Vlans allowed on trunk
Gi0/1 1−4094
Port Vlans allowed and active in management domain
Gi0/1 1−3,10
Port Vlans in spanning tree forwarding state and not pruned
Gi0/1 1−3,10
•
Catalyst 2948G
show vtp domain
Cat2948G> (enable) show vtp domain
Domain Name Domain Index VTP Version Local Mode Password
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−− −−−−−−−−−−− −−−−−−−−−−− −−−−−−−−−−
cisco 1 2 client −
Vlan−count Max−vlan−storage Config Revision Notifications
−−−−−−−−−− −−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−
8 1023 3 disabled
Last Updater V2 Mode Pruning PruneEligible on Vlans
−−−−−−−−−−−−−−− −−−−−−−− −−−−−−−− −−−−−−−−−−−−−−−−−−−−−−−−−
•
Cisco − Configuring Inter−VLAN Routing with Catalyst 3750 Series Switches in a Stacked Configuration