Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Configuring IP Settings
Using the Phone Network Configuration Screen
Procedure
Step 1 Display the Network Configuration menu.
For instructions, see the “Displaying the Network Configuration Menu” section on page
Step 2 Unlock Network Configuration menu options.
For instructions, see the “Unlocking and Locking Options on the Network
Configuration Menu” section on page
Step 3 Scroll to DHCP Address Released.
If the DHCP address is currently assigned, the option appears as
DHCP Address Released NO
Step 4 Press the Yes softkey to release the
Step 5 Press Save.
The phone remains in an idle state, without an IP address assigned, until you do one of the following actions:
•Manually assign an IP address.
•Set DHCP Address Released back to No.
•Power cycle the phone, which enables all default settings, including enabling DHCP.
Related Topics
•Enabling DHCP, page
•Disabling DHCP, page
•Configuring IP Settings, page
Configuring IP Settings
Use these guidelines when manually configuring the IP settings:
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
|
| |
|