Cisco Systems 4.2 Assigning a Default Router, 4-19, Using the Phone Network Configuration Screen

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone

Configuring IP Settings

You may be prompted to enter a password.

The Network Parameters web page appears.

Step 3 To set the IP address, enter an address in the StaticIP field and click Apply.

Using the Phone Network Configuration Screen

Procedure

Step 1 Display the Network Configuration menu.

For instructions, see the “Displaying the Network Configuration Menu” section on page 4-4.

Step 2 Unlock Network Configuration menu options.

For instructions, see the “Unlocking and Locking Options on the Network

Configuration Menu” section on page 4-5.

Step 3 Scroll to IP Address.

Step 4 Press the Edit softkey.

Step 5 Enter the new IP address.

For information about entering values, see the “Guidelines for Editing Settings in the Network Configuration Menu” section on page 4-6.

Step 6 Press Validat.

Step 7 Press Save.

Assigning a Default Router

If you manually assign an IP address to the Cisco Unified IP Phone, you must indicate the default router to be used. The default router provides connectivity to the IP network beyond the subnet to which the phone belongs.

Before you can assign a default router, you must disable DHCP. For instructions, see the “Disabling DHCP” section on page 4-15.

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone

OL-8617-01 4-19