Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
Models ASQ05, ASS05, ASV05, ASQ06, ASV06 only
(See below illustration for Models ASM05, ASM06,
ASQ08 and ASV08.)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly. To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame or the vinyl frame.
Attach securely with nails or screws provided by the installer.
13″ min.
22″ to 36″
(With accordion panels)
Models ASM05, ASM06, ASQ08 and ASV08 only
(See above illustration for Models ASQ05, ASS05,
1/2″ higher than storm window frame
Storm window frame
1/2″ higher
than vinyl frame (on some windows)
Wood
Stool
Vinyl frame
ASV05, ASQ06, ASV06.)
131⁄2″ min.
241⁄2″ to 36″
(With accordion panels)
3PREPARE AIR CONDITIONER
ARemove the backing from the top mounting rail seal strip and attach it to the bottom of the top mounting rail. Cut to size.
BInstall the top mounting rail with 3 or 4 type A screws (depending on the number of holes in the top mounting rail) from the outside of the case.
Top mounting |
rail |
Bottom mounting rail
11