Installation Instructions
3PREPARE AIR CONDITIONER (CONT.)
CLoosen the lower screw on each side of the case and hook a security bracket on each side. To allow for later adjustment, do not tighten screws until installing the unit in the window.
Security bracket
Security bracket
DInsert the frames of the accordion panels into the top and bottom mounting rails. Attach the accordion panels to the side of the case using 6 type A screws.
Top mounting rail
Accordion panels
4INSTALL AIR CONDITIONER IN WINDOW
ACut the window sash seal to the window width and stick the adhesive side to the bottom of the sash.
Window sash seal
BPlace the air conditioner on the stool with the bottom mounting rail against its back edge. Center it and close the window securely behind the top mounting rail.
It should be level or slightly tilted to the outside. Use a level; about a 1/3 bubble will be the correct case slant to the outside.
4INSTALL AIR CONDITIONER IN WINDOW (CONT.)
CExtend the left and right accordion panels to the vertical window sashes and attach with 4 type B screws.
| Type B |
Type B | screws |
screws |
|
Type B screw
DAttach the brackets to the stool on both sides using two type B screws.
ETighten the screws to secure the brackets in place on each side of the air conditioner.
5INSTALL SECURITY BRACKET AND FOAM TOP WINDOW GASKET
AAttach a security bracket with a type B screw.
BCut the foam top window gasket to the window width.
CStuff the foam between the glass and the window to prevent air and insects from getting into the room.
Caulk or
The installation is now complete.
12