Chapter 1 Introducing the Content Router 4430
System Hardware Features
System Hardware Features
The Content Router 4430 is configured for AC-input power. The default factory configuration comes with one power supply installed. The Content Router 4430 has one internal 18-gigabyte (GB) Ultra2 LVD SCSI hard drive. For network connections, the Content Router 4430 has two 10/100BASE-T Ethernet/Fast Ethernet ports with RJ-45 receptacles.
Port Ethernet 0 supports autodetect speed mode and full-duplex operation. The second port (Ethernet 1) is currently not supported.
Table 1-1lists the storage and memory specifications for the
Content Router 4430.
Table 1-1 Storage and Memory Specifications
Specification | Description |
| |
Internal hard disk storage | 1 18-GB Ultra2 LVD SCSI |
| hard drive |
| |
Memory | 16-MB Flash memory |
| 1-GB SDRAM |
| |
Figure 1-1shows the Content Router 4430 front panel. Figure 1-2shows the rear panel with one AC power supply.
| Cisco Content Router 4430 Hardware Installation Guide |
1-2 | 78-12541-01 |
