Cisco Systems 4430 specifications 2 Ports and Receptacles continued, Back Panel, LEDs

Chapter 1 Introducing the Content Router 4430

System Hardware Features

Table 1-2 Ports and Receptacles (continued)

Item

Slot 0

Slot 1

Description

Bay for hard drive 0.

Bay not used.

Back Panel

Power receptacle	The power cord connects to this plug.
Power switch	This switch toggles between on and off, even though
	the switch always returns to its initial position after
	you press it.
	A power light on the front panel, when lit, indicates
	that the power is on.

Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.

Table 1-3describes the LEDs on the front panel.

	Table 1-3	LEDs
	Indicator		Color	State	Description
	Power		Green	On	Power is flowing to the Content Router.
	System		Green	On	The network connection is active
					(packets are being sent or received).
	LINK		Green	On	The Content Router is connected to the
					network.
	100 Mbps		Green	On	The connection is a 100BASE-TX
					(Fast Ethernet) connection.
	Slot 0		Green	On	Slot 0 is active.
	Slot 1		Green	On	Slot 1 is active.
			Cisco Content Router 4430 Hardware Installation Guide
78-12541-01						1-5