Cisco Systems 5010, 5011 Introduction

CHAPT ER

1-1

Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide

OL-22669-02

1

Introduction

The 5010/5011 cameras are fixed network dome cameras with a built-in Web-based viewer for live

streaming to a standard Web browser (Microsoft Internet Explorer 8).

The cameras support standard H.264 and MJPEG compression formats and dual video streams that can

be configured for a variety of resolutions, frame rates, and bit rates.

Each camera also includes a 2.8 - 8mm Varifocal Megapixel lens, a ready-to-install indoor enclosure,

and a mechanical IR cut filter for increased low-light sensitivity. Additional lenses are available, and the

cameras accept a wide range of megapixel varifocal CS-mount lenses.

The cameras also include built-in Power over Ethernet (PoE), which supplies power to the camera

through the network. If PoE is not available, the camera is prewired for 24 VAC.

Models

Getting Started

Before installing your network camera, thoroughly familiarize yourself with the information in this

section of the manual.

Note • Do not use a network hub when configuring the network settings for the camera.

• To ensure secure access to the network camera, place the camera behind a firewall when it is

connected to a network.

CIVS-IPC-5010 Indoor fixed dome network camera, 2.1 megapixel, day/night, and a

2.8 ~ 8 mm varifocal megapixel lens. This camera has a clear dome.

CIVS-IPC-5011 Indoor fixed dome network camera, 2.1 megapixel, day/night, and a

2.8 ~ 8 mm varifocal megapixel lens. This camera has a smoked dome.

Contents

Main Page CONTENTS Page Page Page Preface Obtaining Documentation and Submitting a Service Request Page Introduction Models Getting Started Parts List Product Overview 1 2 3 4 1 2 7 3 8 9 4 5 6 Product Label Installation In-Ceiling Installation Page Page Surface Installation Page Page Dome Liner and Lower Dome Installation Page Service Cable Wiring Cat5 or Cat6 Cable 8 7 6 5 4 1 2 3 24 VAC Connector Single Camera Wiring 18 8 1 Multiple Camera Wiring Alarm and Relay Connector Connecting a Relay Device Connecting Alarms Supervised Alarms 2-14 Figure 2-18 illustrates the wiring configuration for supervised alarm inputs. Unsupervised Alarms 2-15 Figure 2-20 illustrates the wiring configuration for unsupervised alarm inputs. a cut. Alarm Connections Figure 2-21 shows how to wire the camera to an alarm. Page Operation Camera Configuration Sequence Minimum System Requirements Accessing the IP Camera Logging on to the Camera Live Video Page Live Video Page Icons Selecting a Stream Primary Stream and Secondary Stream QuickView Stream Unicast Taking a Snapshot Displaying Video in the Multiscreen View Settings Page Accessing the Camera Menus System Tab General Settings Information Settings Changing the Device Name Configuring the Time Settings Customizing the Appearance of the Text Overlay Generating a System Log Rebooting the Camera Restoring All Camera Defaults Network Tab General Network Settings Changing the Hostname Turning On DHCP Turning Off DHCP Imaging Tab General Imaging Settings Exposure Settings Focus Settings Tone Map Settings White Balance Settings Window Blanking Settings Configuring the Orientation of the Scene Changing the Digital Processing Settings Selecting Auto Exposure Settings Page Selecting Manual Exposure Settings Day Night Settings Day Night Auto and Manual Modes Day Night Auto Mode Day Night Manual Mode Configuring Auto Focus Settings Configuring Manual Focus Settings Setting Tone Map Options Selecting Auto White Balance Settings Selecting Manual White Balance Settings Turning On Window Blanking Turing Off Window Blanking Deleting a Window Blanking Area A/V Streams Tab Video Presets Video Configuration Selecting a Video Preset Configuration Configuring a Custom Video Stream Configuration Compression Standards Available Camera Resolution Image Rate Bit Rate Quality of Service for Differentiated Services Code Point Rate Control Profile Advance Sharpening Users and Groups Tab Users Groups Creating a New User Editing a User Deleting a User Creating a New Group Editing a Group Deleting a Group General Settings for Users and Groups Setting the Camera to Node Setting the Camera to Mixed Events Tab Sources Handlers Sources Creating an Alarm Event Source Creating a System Event Source Creating a Timer Event Source Editing an Event Source Deleting an Event Source Handlers Creating an Event Handler: Send Email Creating an Event Handler: Write JPEG to SD Card Creating an Event Handler: Upload JPEG to FTP Server Creating an Event Handler: Open/Close Relay Editing an Event Handler Deleting an Event Handler Example Handler Filter Setup Help Menu Log Off Menu Specifications General Mechanical Environmental Physical Video