Cisco Systems 6130

78-10280-01 02/15/00 Cisco 6130 NI-2 DSLAM System Cables 3

Cisco 6130 DSLAM with NI-2 User Guide 3-3

Note When you use one-to-one cables, see TableB-1 through Table B-7 for port mapping

information.

Figure3-2 shows one-to-one cabling between the chassis and the POTS splitter. Use the cables listed

in Table3-2 to make these connections.

Table3-2 1-to-1 Cable Connectors and Cable Part Number—DSLAM to POTS Splitter

Connections

Connectors Cisco Cable Part Number

DSLAM POTS Splitter Kit Subassembly

J39 xDSL 9-32 CAB-61-014 72-1665-01

J40 xDSL 1-8, 65-72

J41 xDSL 73-96

J42 xDSL 33-56

J43 xDSL 57-64, 121-128

J44 xDSL 97-120

Contents

Main CHAPTER 3 Cisco 6130 NI-2 DSLAM System Cables 3 3.1 NEBS Compliance Cabling Guidelines 3.2 Required Cables for Installation with POTS Splitter 3.2.1 Making DSLAM-to-POTS Splitter Cable Connections Page 3 Cisco 6130 DSLAM with NI-2 User Guide3-4 Figure 3-2 DSLAM to POTS Splitter Chassis Cabling Diagram (1-to-1 Cables) P4 3.3 Required Cables for Installation without POTS Splitter Note Some chassis connectors in the cabling diagrams are not used because they are specic to a different Cisco 6100 series NI-2 DSLAM system or because they are reserved for future use. 3.3.1 Using Three-to-Three Cables Cisco 6130 chassis information. Figure 3-3 shows the three-to-three cables. 3 Cisco 6130 DSLAM with NI-2 User Guide3-6 P4 RTN 3.4 Required Cables for Subtended Network Conguration Note Somesystem I/O card connectors might not be used because they are specic to a particular MDF connections Cisco 6130 P14 P17 P15 78-10280-01 02/15/00 Cisco 6130 NI-2 DSLAM System Cables 3 Cisco 6130 DSLAM with NI-2 User Guide 3-7 Figure 3-5 Basic Cabling for Subtending DS3 Type Cisco 6130 NI-2 DSLAMs