3Cisco 6130 NI-2 DSLAM System Cables 78-10280-01 02/15/00
Cisco 6130 DSLAM with NI-2 User Guide3-4
Figure 3-2 DSLAM to POTS Splitter Chassis Cabling Diagram (1-to-1 Cables)
3.3 Required Cables for Installation without POTS SplitterInan installation without a POTS splitter, use only designated cables to connect the Cisco 6130 NI-2
DSLAM and the CO facility MDF. The illustrations in this section show you how to connect
three-to-three cables.
Note Some chassis connectors in the cabling diagrams are not used because they are speciļ¬c to a
different Cisco 6100 series NI-2 DSLAM system or because they are reserved for future use.
3.3.1 Using Three-to-Three Cables
Toassociate the CO facility MDF wire pairs and the DSLAM modem ports, the three-to-three cables
remap wire pairs from the Cisco 6130 NI-2 DSLAM Champ connectors to the CO facility MDF
Champ receptacles.
Cisco 6130
chassis
28842
P14 P17P15E2A VISUAL AUDIBLE
FAN
ALARM
MINMAJCRIT
ACOMINMAJ CRIT
ACOMINMAJ CRIT
ANALOG TEST I/F
RING
TIP
P18-48V_B
-48RTN
-48V_A
-48RTN
P13MODEM
POOL
A
OUT J48
J39
J42
MODEM
POOL
B
OUT
J46