Cisco Systems 700 Series Supported MIBs

Overview of Cisco 700 Series Routers 1-11

Supported MIBs

Cisco 700 series routers support the following SNMP Management Information Bases

(MIBs):

•MIB II

•IEEE 802.1d Bridge MIB

MIB II

Cisco 700 series routers support MIB II standards as follows:

•System

•Interfaces (all objects, except that a connection is considered to be an interface)

•Address translation

•Internet Protocol (IP)

•Transmission Control Protocol (TCP)

•Internet Control Message Protocol (ICMP)

•User Datagram Protocol (UDP)

•SNMP

IEEE 802.1d Bridge MIB

Cisco 700 series routers support IEEE 802.1d MIB standards as follows:

•Base

•Transparent bridging

•Static

Contents

Main Overview of Cisco 700 Series Routers Product Features Dial-On-Demand Routing SPID and Switch Automatic Detection TFTP Client Prole-Based User Name and Password Bandwidth Allocation Control Protocol and Bandwidth Allocation Protocol NetBIOS Over TCP/IP Packet Filter NetBIOS Name Spoong Automatic Conguration From BOOTP DHCP Server DHCP Relay Agent Port Address Translation IP Address Assignment Through IPCP IP RIP Update Linkup Force Dynamically Negotiated IP Addresses Fee Pulse Mode Call Transfer Call Forwarding (Sweden and Finland) Three-Way Call Conferencing Data Call Button (Cisco 770 Series Router Only) Second Number Fail-Over IPX Support IPX Ping Default IPX Route IPX SAP Filtering Service Advertising Protocol (SAP) Helper Security Features SNMP Support Supported MIBs Supported RFCs Router Panels Page 1-14 Cisco 700 Series Router Installation Guide Figure 1-3 Rear Panel, Cisco 761 Router H5789 H5905 H5906 Overview of Cisco 700 Series Routers 1-15 Figure 1-6 Rear Panel, Cisco 766 Router ISDN U NT-1 ISDN S/T 1-16 Cisco 700 Series Router Installation Guide Figure 1-9 Rear Panel, Cisco 775 Router H7861 H8502 Figure 1-10 Rear Panel, Cisco 776 Router Specications The specications for Cisco 700 series routers are listed in Table 1-2. Table 1-3 lists the interfaces available on each Cisco 700 series router by model number.