Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Providing Power to the Cisco Unified IP Phone
You can resolve these issues by isolating the voice traffic onto a separate VLAN. The switch port that the phone is connected to would be configured to have separate VLANs for carrying:
•Voice traffic to and from the IP phone (auxiliary VLAN on the Cisco Catalyst 6000 series, for example)
•Data traffic to and from the PC connected to the switch through the access port of the IP phone (native VLAN)
Isolating the phones on a separate, auxiliary VLAN increases the quality of the voice traffic and allows a large number of phones to be added to an existing network where there are not enough IP addresses for each phone.
For more information, refer to the documentation included with a Cisco switch. You can also access switch information at this URL:
http://cisco.com/en/US/products/hw/switches/index.html
Related Topics
•Understanding the Phone Startup Process, page
•Network Configuration Menu, page 4-5
Providing Power to the Cisco Unified IP Phone
The Cisco Unified IP Phones 7962G, 7942G, 7961G,
Note When you install a phone that is powered with external power, connect the power supply to the phone and to a power outlet before you connect the Ethernet cable to the phone. When you remove a phone that is powered with external power, disconnect the Ethernet cable from the phone before you disconnect the power supply.
The following sections provide more information about powering a phone:
•Power Guidelines, page 2-4
•Power Outage, page
•Obtaining Additional Information about Power, page 2-5
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
|
| ||
|
|
