CHAPTER
2-1
Clear Channel 6-Port T3 (DS3) Line Card Installation and Configuration
OL-3449-02
2
Preparing for Installation
This chapter describes the general equipment, safety, and sit e preparation requirements f or installing th e
6T3 line card. This chapter contains the following sections:
Required Tools and Equipment, page 2-1
Software and Hardware Requirements, page 2-2
75-Ohm In-Line Coaxial Attenuator (Optional ), pa ge 2-2
Safety Guidelines, page 2-2

Required Tools and Equipment

You need the following tools and parts to install a line card. If you need additional equipment, contact
a service representative for ordering information.
6T3 line card
T3 SMB interface cables
Number 2 Phillips screwdriver
Your own electrostatic discharge (ESD)-prevention equipment or the disposable grounding wrist
strap included with all upgrade kits, field-r epl ac eable u nit s ( FRUs), and spa res
Antistatic mat
Antistatic container
Attenuator kit (optional)