A-14
Cisco ASA 5500 Series Hardware Installation Guide
78-16409-03
AppendixA Maintenance and Upgrade Pro cedures
Removing and Replacing the Power Supply
Step 6 Lift the rear of the chassis from the surface and unscrew both the screws that secures the power supply to
the chassis, as shown in Figure A-13.
FigureA-13 Removing the Power Supply Screws
Step 7 Locate the power connector on the system board.
Step 8 Unlatch the p lug, then grasp the sides of the power connector and pull upward while rocking the connector
side to side. Disconnect the power connector from the system board as shown in Figure A-14.
FigureA-14 Disconnecting the Power Connector
1Chassis bottom
119581
POWER
FLASH
STATUS
FLASH
ACTIVE
VPN
1
1AC power supply 2Power connector
119639
1
2