Manuals / Brands / Power Tools / Saw / Cisco Systems / Power Tools / Saw

Cisco Systems 78-16409-03 Replacing the User CompactFlash

1 24

A-23

Cisco ASA 5500 Series Hardware Installation Guide

78-16409-03

AppendixA Maintenance and Upgrade Procedures

Removing and Replacing the CompactFlash

Replacing the User CompactFlash

To replace the user CompactFlash, perform the following steps:

Step 1 Locate the user CompactFlash slot in the rear panel of the chassis. See Figure A-22.

FigureA-22 User CompactFlash Slot

Step 2 With the label facing up, insert the connector end of the user CompactFlash into the slot until the card

is seated in the connector and the release button is pushed out.

Note The user CompactFlash is keyed so that it cannot be inserted wrong.

1User CompactFlash slot

126989

FLASH

CONSOLE AUX

POWER

STATUS

FLASH

VPN

ACTIVE

Contents

Main APPENDIX A Maintenance and Upgrade Procedures Installing and Replacing the 4GE SSM Overview Installing the 4GE SSM Replacing the 4GE SSM Installing and Removing the SFP Modules SFP Module Installing the SFP Module Removing the SFP Module Installing and Replacing the ASA SSM 10/20 1 2 3 4 Installing an ASA SSM 10/20 Replacing an ASA SSM 10/20 Removing and Replacing the Chassis Cover Removing the Chassis Cover A-11 Replacing the Chassis Cover Working in an ESD Environment Removing and Replacing the Power Supply Removing the AC Power Supply Page Page Replacing the AC Power Supply Installing the DC Model + + Removing and Replacing the CompactFlash Removing the System CompactFlash Page Replacing the System CompactFlash Removing the User CompactFlash Replacing the User CompactFlash