Manuals / Brands / Power Tools / Saw / Cisco Systems / Power Tools / Saw

Cisco Systems 78-16409-03 Replacing the System CompactFlash

1 24

A-21

Cisco ASA 5500 Series Hardware Installation Guide

78-16409-03

AppendixA Maintenance and Upgrade Procedures

Removing and Replacing the CompactFlash

Replacing the System CompactFlash

To replace the system CompactFlash, perform the following steps:

Step1 Align the new system CompactFlash with the connector on the riser card.

Step2 Push the system CompactFlash inward until it is fully seated in the connector, see FigureA-20.

FigureA-20 Replacing the System CompactFlash

Step3 Replace the adaptive security appliance cover. See the “Replacing the Chassis Cover” section on

page A-12 for the procedure.

Step 4 Reinstall the network interface cables.

114004

1System CompactFlash

Contents

Main APPENDIX A Maintenance and Upgrade Procedures Installing and Replacing the 4GE SSM Overview Installing the 4GE SSM Replacing the 4GE SSM Installing and Removing the SFP Modules SFP Module Installing the SFP Module Removing the SFP Module Installing and Replacing the ASA SSM 10/20 1 2 3 4 Installing an ASA SSM 10/20 Replacing an ASA SSM 10/20 Removing and Replacing the Chassis Cover Removing the Chassis Cover A-11 Replacing the Chassis Cover Working in an ESD Environment Removing and Replacing the Power Supply Removing the AC Power Supply Page Page Replacing the AC Power Supply Installing the DC Model + + Removing and Replacing the CompactFlash Removing the System CompactFlash Page Replacing the System CompactFlash Removing the User CompactFlash Replacing the User CompactFlash