Restoring the Cisco CallManager Database
Step 6 When prompted to cycle power to the server, turn the power off and leave it off for about 10 seconds, then turn it on again. Under recovery conditions, the
Note Error and failure messages can be expected during initialization of the server because the configuration information is erased from the hard drive during this phase. You can ignore these messages.
Step 7 When the System Restore menu displays again, press the F2 key to restore the system software.
Step 8 Type C to continue configuring the hard drive.
Step 9 Type C to continue loading the software from the
Step 10 When you see the message “Drive image restored successfully!,” remove the
Step 11 Beginning at Step 3 in “Starting the Server Configuration Process” section on page 6, complete all the steps for configuring the server.
To restore the software, you must also complete all the steps in the following sections:
•
•
•
“Configuring Cisco CallManager” section on page 9 to reconfigure Cisco CallManager.
“Configuring Carbon Copy” section on page 10 to reconfigure Compaq Carbon Copy 32.
“Restoring the Cisco CallManager Database” section on page 13 to restore the database.
Restoring the Cisco CallManager Database
If you have restored the
To restore the Cisco CallManager database from a backup copy:
Step 1 If the Cisco CallManager Administration window is open, close it. Also close all browsers.
Step 2 Click Start>Programs>Cisco CallManager>Cisco Process Control.
Step 3 Select all the processes and click Stop.
Note Step 3 stops all Cisco CallManager processes and interrupts Cisco IP Telephony services to your users.
Configuration Notes for Cisco Media Convergence Server 7830 13