Configuring Cisco CallManager
Configuring Cisco CallManager
When you power up and configure the Cisco Media Convergence Server 7830, Cisco CallManager is installed automatically. However, you must set some configuration parameters and install the optional
Setting Up Internet Explorer
When you first access Cisco CallManager on the
Step 1 Click Start>Programs>Cisco CallManager>CallManager Administration.
Step 2 Click Next to start the Internet Connection Wizard.
Step 3 If you want to set up an internet connection at this time, select the appropriate option and enter the required information at the prompts. Otherwise, select the option that says, “I already have an Internet connection set up on this computer and I do not want to change it.” Then click Next.
Step 4 Click Finish to close the Wizard.
When you finish setting up an internet connection, the Cisco CallManager Administration window displays. You can then begin configuring Cisco CallManager.
Configuring Auto Registration
Auto Registration is a Cisco CallManager feature that automatically assigns directory numbers to phones as the phones are connected to the network. If you want to use Auto Registration, you must first set a range of directory numbers for Auto Registration.
To set a range of directory numbers for Auto Registration, complete these steps:
Step 1 In the Cisco CallManager Administration window, click Configuration and System.
Step 2 Scroll down to Auto Registration and click the Configure button.
Step 3 Enter a range of directory numbers to use for Auto Registration. Click Update and then click Continue.
For more information about Auto Registration, refer to the online System Guide by clicking Help or by going to:
http://www.cisco.com/documentation/ccm/v24/index.htm
Configuration Notes for Cisco Media Convergence Server 7830 9
