Cisco Systems 7905G, 7912G manual Softkeys, Softkey Description

Appendix A Additional End User Features on the Cisco IP Phone Models 7905G and 7912G

Softkeys

Table A-1 Call Preference Menu Parameters (continued)

Parameter	Description	To Change
Call Forward	Specifies a phone number to which all calls	1.	Scroll to the Call Forward Number
Number	to the phone are forwarded. If a number is		parameter, press the Edit softkey,
	entered, the Call Forward All feature is		and then enter a phone number.
	activated.	2.	Press the Accept softkey, and then
			press the Save softkey.
Forward to	Specifies the number of seconds after which	1.	Scroll to the Forward to VMail
VMail	an incoming ringing call will be forwarded		Delay(s) parameter, press the Edit
Delay(s)	to the number specified by the Voice Mail		softkey, and then enter a value.
	Number parameter.	2.	Press the Accept softkey, and then
			press the Save softkey.

Softkeys

Table A-2describes the softkeys that can appear on the

Cisco IP Phone models 7905G and 7912G and that are not described in the User Guide for the phone.

		Table A-2	Sofkteys
		Softkey		Description
		Back		Displays the previous menu.
		BlndXfr		Allows the blind transfer of a call when Allow Blind
				Transfer is enabled in the Call Preferences menu. In a
				blind transfer, you transfer a caller to another number
				without talking to the party who is to receive the call or
				verifying that the new party is there.
				To perform a blind transfer, follow these steps:
				1. During a call, press the More soft key, then press
				the BlndXfr soft key. The call goes on hold.
				2. Dial the number to which to transfer the call. The
				phone hangs up automatically.
	Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
A-6				OL-4277-01