4-9
Site Survey Guide for Deploying Cisco 7920 IP Phones
OL-6315-01
Chapter4 Conducting a WIPT Survey
How To Survey for the WIPT
Figure4-7 AirMagnet Client Walkabout
When you select display mode on the bottom tool bar, SiteViewer displays data collected during the
survey. Two new panels appear in this mode: the Filter area in the center left panel, and the map zoom
box in the lower left. You can display one or more survey data sets by clicking the appropriate check box
in the data catalog area in the upper left of the window. You can also select the display parameter for the
data sets from the menu in the upper right corner of the floor plan display area. The choices inc lude:
Signal, Noise, Speed, SNR. You can enable appropriate filters for the data. The survey data is displayed
in color-coded zones. In Figure4-8, colored areas represent signal level in 10-dBm increments.