Cisco Systems 7960G, 7940G manual Network Configuration Menu, Option Description To Change

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone

Network Configuration Menu

Table 4-1	Settings Configurable from the Network Configuration Menu
			Network Configuration
Category		Description	Menu Option
IP settings		If you do not use DHCP in your network, you can make IP settings	IP Address
		manually.
			Default Router 1-5
			Subnet Mask
			Domain Name
			DNS Server 1-5
Port settings		Allow you to set the speed and duplex of the network and access ports.	SW Port Configuration
			PC Port Configuration
TFTP settings		If you do not use DHCP to direct the phone to a TFTP server, you must	TFTP Server 1
		manually assign a TFTP server. You can also assign an alternative
			Alternate TFTP Server
		TFTP server to use instead of the one assigned by DHCP.
			TFTP Server 2
VLAN settings		Admin. VLAN ID allows you to change the administrative VLAN used	Admin. VLAN ID
		by the phone. PC VLAN allows the phone to interoperate with	PC VLAN
		third-party switches that do not support a voice VLAN.

Related Topics

•Displaying the Network Configuration Menu, page 4-1

•Unlocking and Locking Options, page 4-2

•Editing Values, page 4-3

•Network Configuration Menu, page 4-4

Network Configuration Menu

The Network Configuration menu contains options for viewing and making a variety of network settings. Table 4-2describes these options and, where applicable, explains how to change them.

For information about how to access the Network Configuration menu, see the “Displaying the Network Configuration Menu” section on page 4-1.

Before you can change an option on this menu, you must unlock options as described in the “Unlocking and Locking Options” section on page 4-2. The Edit, Yes, or No softkeys for changing network configuration options appear on the Cisco Unified IP Phones 7960G/7940G only if options are unlocked.

For information about the keys you can use to edit options, see the “Editing Values” section on page 4-3.

Table 4-2	Network Configuration Menu Options
Option		Description	To Change
DHCP Server		IP address of the Dynamic Host Configuration Protocol	Display only—cannot configure.
		(DHCP) server from which the phone obtains its IP address.
BOOTP Server		Indicates whether the phone obtains its configuration from	Display only—cannot configure.
		a Bootstrap Protocol (BootP) server instead of from a
		DHCP server.

Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)

4-4 OL-15498-01