Chapter 3 Setting Up the Cisco Unified IP Phone
Before You Begin
If you plan to use
Cisco Unified IP Phone to the network. For information about enabling and configuring
You must use Cisco Unified CallManager to configure and assign telephony features to the Cisco Unified IP Phones. See the “Telephony Features Available for the Phone” section on page
In Cisco Unified CallManager, you can add users to the database and associate them with specific phones. In this way, users gain access to web pages that allow them to configure items such as call forwarding, speed dialing, and voice messaging system options. See the “Adding Users to Cisco Unified CallManager” section on page
Safety
Review the following warnings before installing the
Cisco Unified IP Phone 7970. To see translations of these warnings, refer to the Regulatory Compliance and Safety Information for the Cisco Unified IP Phone 7900 Series document that accompanied this device.
Warning Read the installation instructions before you connect the system to its power source.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
| ||
|
