4
5 Connect the Cisco 811 or 813 Router to a PC
Follow these steps to connect the Cisco 811 or 813 router to a PC:
Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 811 router) or from any of the yellow Ethernet
ports (Cisco 813 router) on the back panel of the router to the Ethernet port on the NIC on the computer.
Figure 1 Connecting a Cisco 811 or 813 Router to a PC
Step 2 Verify that the TO HUB/TO PC switch on the left side of the back panel has been set to the TO PC position.
Note The TO HUB/TO PC but ton corresponds to the E thernet port on the Cisco 811 router and to Ethernet port 1
on the Cisco 813 router.
Caution Always connect the yellow cable or Ethernet cable that you supply to the yellow ports on the router. Do not connect
the cable to an ISDN S/T or U port or to a Network Termination 1 (NT1) device. Accidently connecting the cable
to the wrong port can damage your router.
Cisco 813 router
TO HUB
TO PC
Model Cisco 813
4
3
2
1
ETHERNET 10 BASE T PHONE
CONSOLE ISDN S/T ISDN U
ISDN U 2
1
+5, -24, -71 VDC
PC
SER 0
OK
LAN
AUXAUX
ON
NOR
RVS
DSU
OFF