Prepare the PVR for Interactive TV
Before You Begin
Attention: Before you start the installation of the Cisco 8455DVB PVR, you must first complete the steps in the “Installatie Hoofdaansluiting Interactieve Televisie.”
Warning: Electric shock hazard. Unplug all electronic devices before connecting or disconnecting any device cables to the PVR.
Overview
Complete the following steps to prepare and activate the PVR for Interactive TV and you will soon be enjoying
1.Insert the smartcard into the front of the PVR.
2.Connect the PVR to your TV.
3.Prepare the PVR by entering your account information.
4.Customize the language settings.
5.Customize the PVR settings.
6.Set the audio and video formats.
7.Set the Parental Control PIN.
8.Programme the remote control to operate your TV (optional).
9.Enjoy using the PVR to watch and record your favourite shows.
Insert the Smartcard
When you purchased the PVR you should also have purchased a smartcard. The smartcard is necessary to operate the PVR.
1.Insert the smartcard into the front of the PVR with the chip side down.
2.Once inserted, do not remove the smartcard.
Tip: The PVR will not operate without the smartcard.
tv | menu | opnemen |
CISCO 8455DVB
ME U L O
V
Z
E
N
D
E
R
T13632
Chip
(Insert this side down)
T13633
19
