All Code Scan Method
1.Turn on the TV.
2.Press the Mode key on the remote control until the red LED on the Power key flashes twice.
3.Within 5 seconds, press 001. The red LED will flash twice to confirm the entered code.
4.Point the remote control toward the TV and press and hold the Power key until your TV turns off.
5.While the remote control is scanning the codes, you can release the Power key and test the function keys.
•If a key is not pressed within 10 seconds, the brand search is stopped and the remote control returns to normal mode.
•If the TV goes into
Tips:
•This process may take as long as 10 minutes.
•The remote control may find several codes that operate your TV. However, if some function keys do not work properly, repeat steps 1 through 5 until a code is found that operates all function keys.
•During the scan process you can press the W key as many as five times to select previous codes or the X key to search forward again.
Remember the Code That Worked
To find out which code your remote control uses to operate your TV:
1.Press the Mode key on the remote control until the red LED flashes twice.
2.Press 002. The red LED will flash twice to confirm the entered code.
3.Press 1; then, count the number of times the LED flashes. The number of flashes indicates the first number of the code.
4.Press 2; then, count the number of flashes. The number of flashes indicates the second number of the code.
5.Press 3; then, count the number of flashes. The number of flashes indicates the third number of the code.
Tips:
•Write the code here: ___________________________________________________________________ .
•If the LED does not flash after you press the keys, the code digit is 0.
24
