1-46
Cisco 8500 Series Wireless Controller Installation Guide
Chapter 1 Cisco 8500 Series Wireless Controller Installation Guide
Using the Startup Wizard
Configure a RADIUS Server now? [YES][no]: no
Warning! The default WLAN security policy requires a RADIUS server.
Please see documentation for more details.
Step 14 Enter the code for the country in which the controller will be used.
Enter Country Code list (enter 'help' for a list of countries) [US]:
Note Enter help to view the list of available country codes.
Step 15 Enter yes to enable or no to disable each of the 802.11b, 802.11a, and 802.11g lightweight access point
networks.
Enable 802.11b Network [YES][no]:
Enable 802.11a Network [YES][no]:
Enable 802.11g Network [YES][no]:
Note 802.11n is always enabled.
Step 16 Enter yes to enable or no to disable the controller’s radio resource management (RRM) auto RF feature.
Enable Auto-RF [YES][no]:
Note The auto RF feature enables the controller to automatically form an RF group with other
controllers. The group dynamically elects a leader to optimize RRM parameter settings, such as
channel and transmit power assignment, for the group.
Step 17 If you want the controller to receive its time setting from an external Network Time Protocol (NTP)
server when it powers up, enter yes to configure an NTP server. Otherwise, enter no.
Configure a NTP server now? [YES][no]: no
Step 18 If you entered no in the previous step and want to manually configure the system time on your controller
now, enter yes. If you do not want to configure the system time now, enter no.
Configure the system time now? [YES][no]:
Step 19 If you entered yes in the previous step, enter the current date in MM/DD/YY format and the current time
in HH:MM:SS format.
Enter the date in MM/DD/YY format: 03/28/11
Enter the time in HH:MM:SS format: 14:36:30
Step 20 When prompted to verify that the configuration is correct, enter yes or no.
Configuration correct? If yes, system will save it and reset. [yes][NO]: yes
The controller saves your configuration, reboots, and prompts you to log in.
Configuration saved!
Resetting system with new configuration...
Configuration saved!
Resetting system with new configuration...
SoftDog: Unexpected close, not stopping watchdog!
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Stopping portmap daemon....