![Configure Address Pools](/images/new-backgrounds/54422/5442215x1.webp)
Chapter 7 Scenario:
Implementing the
Step 2 When you have finished adding new users, click Next to continue.
Configure Address Pools
For remote clients to gain access to your network, you must configure a pool of IP addresses that can be assigned to remote VPN clients as they are successfully connected. In this scenario, the pool is configured to use the range of IP addresses 209.165.201.1 to 209.166.201.20.
In Step 6 of the VPN Wizard, perform the following steps:
Step 1 From the
Step 2 Enter the start of the range of IP addresses to be used in the pool.
Step 3 Enter the end of the range of IP addresses to be used in the pool.
| Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide |