Enterasys Networks VH-2402S manual Displays/configures extended bridge capabilities provided by

Selection	Description
Device Control Menu
Port Configuration	Enables any port, enables/disables flow control, and sets
	communication mode to auto-negotiation, full duplex or half
	duplex.
Port Information	Displays operational status, including link state, flow control
	method, and duplex mode.
Spanning Tree	Enables Spanning Tree Algorithm; also sets parameters for
Configuration	hello time, maximum message age, switch priority, and
	forward delay; as well as port priority and path cost.
Spanning Tree	Displays full listing of parameters for the Spanning Tree
Information	Algorithm.
Mirror Port	Sets the source and target ports for mirroring.
Configuration
Port Trunking	Specifies ports to group into aggregate trunks.
Configuration
IGMP Configuration	Configures IGMP multicast filtering.
BStorm Control	Allows you to enable broadcast storm control and set the
Configuration	packet-per-second threshold.
Extented Bridge	Displays/configures extended bridge capabilities provided by
Configuration	this switch, including support for traffic classes, GMRP
	multicast filtering, and VLAN extensions.
802.1P Configuration	Configures default port priorities and queue assignments.
802.1Q VLAN	Displays basic VLAN information, such as VLAN version
Base Information	number and maximum VLANs supported.
802.1Q VLAN Current	Displays VLAN groups and port members.
Table Information
802.1Q VLAN Static	Configures VLAN groups via static assignments, including
Table Configuration	setting port members, or restricting ports from being
	dynamically added to a port by the GVRP protocol.
Port Assignment	Displays/configures port-specific VLAN settings, including
VLAN Configuration	PVID, ingress filtering, and 802.1Q trunks.
Multicast Router Port	Displays the ports on the switch attached to a neighboring
Information	multicast router/switch for each VLAN ID.
Static Multicast Router	Assigns ports that are attached to a neighboring multicast
Port Cfg	router/switch.
IGMP Member Port	Assigns ports that are attached to hosts who want to receive
Configuration	a specific multicast service.
Port Security	Allows you to enable and configure port security for the
Configuration	switch.
Network Monitor Menu
Port Statistics	Displays statistics on network traffic passing through the
	selected port.
RMON Statistics	Displays detailed statistical information for the selected port
	such as packet type and frame size counters.
Unicast Address Table	Provides full address listing, as well as search and clear
	functions.

10 VH-2402S User Interface VH-2402S