Enterasys Networks VH-2402S Configuring Bridge MIB Extensions, Extended Bridge Configuration

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support Traffic Classes, Multicast Filtering and Virtual LANs. To configure these extensions, use the Extended Bridge Configuration screen as shown below:

Vertical Horizon Local Management -- VH-2402S

		Extended Bridge Configuration
		Bridge Capability : (Read Only)
		Extended Multicast Filtering Services : NO
		Traffic Classes		: YES
		Static Entry Individual Port		: YES
		Configurable PVID Tagging		: YES
		Local VLAN Capable		: NO
		Bridge Settings :
		Traffic Class		: TRUE
		VLAN Learning		: SVL
		GMRP		: DISABLED
		GVRP		: DISABLED
		<APPLY>	<OK>	<CANCEL>
	Use <TAB> or arrow keys to move. <Space> to scroll options.
	Figure 2-32. Extended Bridge Configuration
Parameter		Description
Bridge Capability
Extended Multicast		Indicates that this switch does not support the filtering of
Filtering Services		individual multicast addresses based on GMRP (GARP Multicast
		Registration Protocol). Note that this function is not available for
		the current firmware release.
Traffic Classes		This switch provides mapping of user priorities to multiple traffic
		classes. (Refer to 802.1P Configuration.)
Static Entry		This switch enables static filtering for unicast and multicast
Individual Port		addresses. (Refer to Network Monitor Menu / Static Unicast
		Address Table Configuration and Static Multicast Address Table
		Configuration.)
Configurable		This switch allows you to override the default PVID setting (Port
PVID Tagging		VLAN ID used in frame tags) and its egress status (VLAN-Tagged
		or Untagged) on each port. (Refer to Port Assignment VLAN
		Configuration.)
Local VLAN		This switch does not support multiple local bridges (that is,
Capable		multiple Spanning Trees).

44 VH-2402S User Interface VH-2402S