Enterasys Networks VH-2402S manual Main Menu, Selection Description

Main Menu

The Main Menu is the first screen seen after successfully logging into the system. Figure 2-2shows the Main Menu and the accompanying table describes the Main Menu.

Vertical Horizon Local Management -- VH-2402S

Main Menu

System Information Menu...

Management Setup Menu...

Device Control Menu...

Network Monitor Menu...

System Restart Menu...

Exit

Use <TAB> or arrow keys to move. <Enter> to select.

	Figure 2-2. Main Menu
Selection	Description
System Information Menu
System Information	Provides basic system description, including contact
	information.
Switch Information	Shows hardware/firmware version numbers, power status,
	and expansion modules used in the stack.
Management Setup Menu
Network Configuration	Includes IP setup, Ping facility, HTTP (Web Agent) setup,
	Telnet configuration, and MAC address.
Serial Port	Sets communication parameters for the serial port, including
Configuration	management mode, baud rate, console time-out, and screen
	data refresh interval.
SNMP Configuration	Activates traps; and configures communities and trap
	managers.
Console Login	Sets user names and passwords for system access, as well
Configuration	as the invalid password threshold and lockout time.
TFTP Download	Downloads new version of firmware to update your system
	(in-band).
Configuration Save &	Saves the switch configuration to a file on a TFTP server.
Restore	This file can be later downloaded to restore the configuration.
Management	Specifies if management access to the switch is available
Configuration	from all VLANs or restricted to one VLAN.

9033645-01 VH-2402S User Interface 9