![](/images/new-backgrounds/1299875/299875121x1.webp)
Port Assignment VLAN Configuration
Use this screen to configure
|
| Vertical Horizon Local Management |
| ||||
|
|
| Port Assignment VLAN Configuration |
| |||
|
| Unit Port | PVID | 802.1Q Trunk | Ingress Filter |
| |
|
|
| |||||
|
| 1 | 1 | 3 | NO | TRUE |
|
|
| 1 | 2 | 3 | NO | TRUE |
|
|
| 1 | 3 | 1 | NO | FALSE |
|
|
| 1 | 4 | 1 | NO | FALSE |
|
|
| 1 | 5 | 1 | NO | FALSE |
|
|
| 1 | 6 | 1 | NO | FALSE |
|
|
| 1 | 7 | 1 | NO | FALSE |
|
|
| 1 | 8 | 1 | NO | FALSE |
|
|
| 1 | 9 | 1 | NO | FALSE |
|
|
| 1 | 10 | 1 | NO | FALSE |
|
| Unit ID | : 1 |
| [Show] |
|
| |
| Port ID | : 1 |
| [More] |
|
| |
|
|
| <APPLY> | <OK> | <CANCEL> |
| |
| Use <TAB> or arrow keys to move, <Space> to scroll options. |
| |||||
|
|
| |||||
| Figure | ||||||
|
|
|
|
|
| ||
Parameter |
| Description |
|
|
| ||
PVID |
| The VLAN ID assigned to untagged frames received on this port. | |||||
|
|
| Use the PVID to assign ports to the same untagged VLAN. | ||||
802.1Q Trunk |
| Used to enable/disable the VLAN trunk status for the port. A | |||||
|
|
| VLAN Trunk link between two | ||||
|
|
| traffic from all VLANs, allowing VLAN tagged frames to maintain | ||||
|
|
| their VLAN ID across multiple switches. When enabled, a port | ||||
|
|
| joins all configured VLANs and the untagged port VLAN ID | ||||
|
|
| (PVID) is set to 4000, a reserved VLAN ID for trunk ports. | ||||
Ingress Filter* |
| If set to “True,” incoming frames for VLANs which do not include | |||||
|
|
| this port in their member set will be discarded at the inbound port. | ||||
[Show] |
| Displays settings for the specified stack unit and port. | |||||
[More] |
| Displays consecutively numbered stack units and ports. |
*This control does not affect VLAN independent BPDU frames, such as GVRP or STP. However, it does affect VLAN dependent BPDU frames, such as GMRP.
|