Enterasys Networks VH-2402S manual 34 .1P Port Priority Configuration

Port Priority Configuration

The default priority for all ingress ports is zero. Therefore, any inbound frames that do not have priority tags will be placed in the low priority output queue. Default priority is only used to determine the output queue for the current port; no priority tag is actually added to the frame. You can use the 802.1P Port Priority Configuration menu to adjust default priority for any port as shown below:

		Vertical Horizon Local Management -- VH-2402S
	802.1P Port Priority Configuration : Unit 1 Port 1 - 12
		Port	Default Ingress	Number of Egress
			User Priority	Traffic Class
		----------------------------------------------------------
		1	0	2
		2	0	2
		3	0	2
		4	0	2
		5	0	2
		6	0	2
		7	0	2
		8	0	2
		9	0	2
		10	0	2
		11	0	2
		12	0	2
	<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
	Use <TAB> or arrow keys to move, other keys to make changes.
	Figure 2-34. 802.1P Port Priority Configuration
Parameter		Description
Port		Numeric identifier for switch port.
Default Ingress User		Default priority can be set to any value from 0~7, where 0~3
Priority		specifies the low priority queue and 4~7 specifies the high priority
		queue.
Number of Egress		Indicates that this switch supports two priority output queues.
Traffic Classes

9033645-01 VH-2402S User Interface 47