Enterasys Networks VH-2402S manual Configuring Community Names, Snmp Communities

Configuring Community Names

The following figure and table describe how to configure the community strings authorized for management access. Up to 5 community names may be entered.

Vertical Horizon Local Management -- VH-2402S

		SNMP Configuration : SNMP Communities
				Community Name	Access	Status
		1.	public	READ ONLY		ENABLED
		2.	private	READ/WRITE		ENABLED
		3.
		4.
		5.
		<APPLY>		<OK>	<CANCEL>
	Use <TAB> or arrow keys to move, other keys to make changes.
		Figure 2-13. SNMP Communities
Parameter		Description
Community Name		A community entry authorized for management access.
		Maximum string length : 20 characters
Access		Management access is restricted to Read Only or Read/Write.
Status		Sets administrative status of entry to enabled or disabled.

Note: The default community strings are “public” with Read Only access, and “private” with Read/Write access.

9033645-01 VH-2402S User Interface 21