5-41
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter5 Parameters and Defaults Tone Configuration Parameters
Range
-9 to 2 dB
Default
-4
Voice Configuration Menu Access Code
371
Related Parameter
FXSInputLevel, page 5-40
Tone Configuration ParametersThe Cisco ATA supports the following tone parameters:
•DialTone
•BusyTone
•ReorderTone
•RingBackTone
•CallWaitTone
•AlertTone
The Cisco ATA supports two types of tone-parameter syntax—b asic format and extended format. Basic
format is used in most countries; use the extended format only if the country in which the CiscoATA is
used requires this format.
This section covers all the call-progress tones that the CiscoATA supports, and contains the following
topics:
•Tone Parameter Syntax—Basic Format, page 5-41
•Tone Parameter Syntax—Extended Formats, page 5-43
•Recommended Values, page 5-48
•Specific Tone Parameter Information, page 5-48
This section also covers the following parameter, which is for configuring phone-ringing characteristics:
•RingOnOffTime, page 5-51
Note For detailed recommendations of tone-parameter values by country, see AppendixE, “Recommended
Cisco ATATone Parameter Values by Country.”
Tone Parameter Syntax—Basic Format
Each tone is specified by nine integers, as follows:
parametername: NumOfFreqs,Tfreq1,Tfreq2,Tamp1,Tamp2,Steady,OnTime,OffTime, TotalToneTime
•parametername is the name of the tone.