Cisco Systems BC-145 manual BC-160, 5500, 78-11737-02, TrCRF VLAN, Token, Ring, Network, 51886

Configuring Token Ring Inter-Switch Link

TRISL Configuration Examples

IPX Routing Source-Routed Frames Between a TRISL VLAN and a Token Ring Interface Example

Figure 60 shows IPX routing source-routed frames between a TRISL VLAN and a Token Ring interface.

Figure 60 IPX Routing Source-Routed Frames Between a TRISL VLAN and a Token Ring Interface

Catalyst 5000 switch

Network 1

Token

Ring 2

Fast Ethernet 4/0.1 TrBRF 999/Bridge 14 Network 10

End station End station

5500

Token Ring switch module

Token	TrCRF VLAN 40
Ring 1	Slot 5
	Port 1

End station End station

51886

The following is the configuration for the router:

ipx routing

!

interface TokenRing 3/1 ipx network 1 multiring all

!

interface fastethernet4/0.1 ipx network 10

encapsulation tr-isl trbrf 999 bridge-num 14 multiring trcrf-vlan 200 ring 100 multiring all

The following is the configuration for the Catalyst 5000 switch with the Token Ring switch module in slot 5. In this configuration, the Token Ring port attached to ring 1 is assigned to the TrCRF VLAN 40.

#vtp

set vtp domain trisl set vtp mode server set vtp v2 enable #drip

set tokenring reduction enable set tokenring distrib-crf disable #vlans

set vlan 999 name trbrf type trbrf bridge 0xe stp ibm

set vlan 200 name trcrf200 type trcrf parent 999 ring 0x64 mode srb set vlan 40 name trcrf40 type trcrf parent 999 ring 0x1 mode srb #add token port to trcrf 40

set	vlan 40	5/1
set	trunk 1/2	on

	Cisco IOS Bridging and IBM Networking Configuration Guide
BC-160	78-11737-02