Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router
Document Revision History
The Document Revision History table below records technical changes to this document beginning with version
Document |
|
|
Versions | Date | Change Summary |
|
|
|
July, 2007 | Adding telecom information | |
|
|
|
November, 2006 | Adding Statement 371 | |
|
|
|
August 8, 2005 | Updating and arranging safety warnings in alphabetical | |
|
| order |
|
|
|
Read this document before installing or servicing the following systems:
Cisco 7301
Note Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
This document includes the following sections:
•Translated Safety Warnings, page 2
•Japanese Electric Appliance and Radio Laws, page 50
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA
© 2007 Cisco Systems, Inc. All rights reserved.
