![](/images/new-backgrounds/1142276/142276105x1.webp)
Chapter 2 Supervisor Engines
Supervisor Engine 720
Table
Table 2-16 Supervisor Engine 720 Front Panel Status LEDs
LED | Color and Meaning |
|
|
STATUS | The STATUS LED indicates the status of the supervisor engine. |
| • |
| operational (normal initialization sequence). |
| • |
| diagnostics (normal initialization sequence) or an |
| overtemperature condition has occurred. (A minor temperature |
| threshold has been exceeded during environmental |
| monitoring.) |
| • |
| operational because a fault occurred during the initialization |
| sequence or an overtemperature condition has occurred. (A |
| major temperature threshold has been exceeded during |
| environmental monitoring.) |
|
|
SYSTEM | The SYSTEM LED indicates the status of the system components. |
| • |
| • |
| • |
|
|
ACTIVE | The ACTIVE LED indicates whether the supervisor engine is |
| operating in active mode or is in standby mode. |
| • |
| • |
|
|
PWR MGMT | The supervisor engine monitors each module’s power requirements |
| and status relative to the system’s overall power capacity before |
| fully powering up each module in the chassis. |
| • |
| • |
| sufficient power is available for all modules. |
| • |
| detected. There is insufficient power for all modules to power |
| up. |
| • |
|
|
DISK 0 and DISK 1 LEDs | These LEDs are illuminated green when the installed Flash PC card |
| is being accessed and is performing either a read operation or a |
| write operation. |
|
|
Catalyst 6500 Series Supervisor Engine Guide
|
| ||
|
|