Cisco Systems Modular Gigabit Ethernet Line Card I manual

Step 6 Use a Phillips screwdriver to insert and tighten the two screws on the faceplate of the line card, 3 to 5 in-lbs, as shown in Figure 8.

Caution Apply no more than 5 in-lbs of torque when tightening the screw.

Figure 8 Inserting the 2 screws on the Faceplate of the Line Card

PUSH

CORNERS

TO

INSTALL

PUSH

CORNERS

TO

INSTALL

129856

Inserting an EPA into a Modular Gigabit Ethernet Line Card

6 78-17296-01 A0