Send document comments to nexus3k-docfeedback@cisco.com
C-2
Cisco Nexus 3000 Series Hardware Installation Guide
OL-25338-04
Appendix C Cable and Connector Specifications
Console Port
Console Port
The console port is an asynchronous RS-232 serial port with an RJ-45 connector.
Supported Power Cords and Plugs
Each power supply has a separate power cord. Standard power cords or jumper power cords are available
for connection to a power distribution unit that has IEC 60320 C19 outlet receptacles. The standard
power cords have an IEC C13 connector on the end that plugs into the switch. The optional jumper power
cords, for use in cabinets, have an IEC C13 connector on the end that plugs into the switch and an IEC
C14 connector on the end that plugs into an IEC C13 outlet receptacle.
Note Only the regular power cords or jumper power cords provided with the switch are supported.
Table C-1 lists the power cords for the Cisco Nexus 3000 Series switches and provides their lengths in
feet and meters.
Tab l e C-1 Power Cords for the Cisco Nexus 3000 Series Switches
Description
Length Power Cord Reference
Illustration
Feet Meters
SFS-250V-10A-AR
Power cord 250 VAC 10 A, IRAM 2073 plug
Argentina
8.2 2.5 Figure C-2
CAB-9K10A-AU
Power cord 250 VAC 10 A, 3112 plug,
Australia
8.2 2.5 Figure C-3
SFS-250V-10A-CN
Power cord 250 VAC 10 A, GB 2009 plug
China
8.2 2.5 Figure C-4
CAB-9K10A-EU
Power cord, 250 VAC 10 A, M 2511 plug
Europe
8.2 2.5 Figure C-5
SFS-250V-10A-ID
Power cord 250 VAC 16A, EL-208 plug
South Africa, United Arab Emerits, India
8.2 2.5 Figure C-6
SFS-250V-10A-IS
Power cord 250 VAC 10 A, SI-32 plug
Israel
8.2 2.5 Figure C-7
CAB-9K10A-IT
Power cord 250 VAC 10 A, CEI 23-16 plug
Italy
8.2 2.5 Figure C-8
CAB-9K10A-SW
Power cord 250 VAC 10 A, MP232 plug
Switzerland
8.2 2.5 Figure C-9