885
CiscoUnified Communications Manager Express System Administrator Guide
OL-10663-02
Configuring Presence ServiceLast Updated: November 26, 2007
This module describes presence support in a CiscoUnified Communications Manager Express
(Cisco UnifiedCME) system.
Finding Feature Information in This Module
Your CiscoUnified CME version may not support all of the features documented in this module. For a
list of the versions in which each feature is supported, see the “Feature Information for Presence Service”
section on page 905.
Contents
•Prerequisites for Presence Service, page 885
•Restrictions for Presence Service, page886
•Information About Presence Service, page 886
•How to Configure Presence Service, page887
•Configuration Examples for Presence, page900
•Additional References, page903
•Feature Information for Presence Service, page 905
Prerequisites for Presence Service
•Cisco Unified CME 4.1 or a later version.
•Cisco Unified IP Phones 7911G, 7941G, 7941GE, 7961G, 7961GE, 7970G, and 7971GE require
firmware load 8.2(1) or a later version.