Support Information for Cisco Switches
Cisco Catalyst 4500 Series Switches
162
Cisco Active Network Abstraction VNE Reference Guide, Version 3.6 SP1
OL-14763-02
Cisco Catalyst 4500 Series—Supported Software Versions
Table 121 lists the supported software versions for Cisco Catalyst 4500 Series switches in
Cisco ANA 3.6 SP1.
Tab l e 121 Supported Software Versions for Cisco Catalyst 4500 Series Switches
Software Version
Certification
Level
IOS 12.1(12c)EW1 V
IOS 12.2(20)EWA1 V
IOS 12.2(25)SG V
IOS 12.2* S
IOS 12.1* S
Note Software versions marked with an asterisk (representing a wildcard) are supported by
Cisco ANA 3.6 SP1. Specific software versions that have been tested and verified are listed individually
and marked as V.
Cisco Catalyst 4500 Series—Supported Topologies
The following topologies are supported for Cisco Catalyst 4500 Series switches in Cisco ANA 3.6 SP1:
• MAC
• CDP
Cisco Catalyst 4500 Series—Supported Modules
Table 122 lists the supported modules for Cisco Catalyst 4500 Series switches in Cisco ANA 3.6 SP1.
Tab l e 122 Supported Modules for Cisco Catalyst 4500 Series Switches
Module Name Module Description
Certification
Level
WS-X4013+ Catalyst 4500 Supervisor II-Plus (IOS),
2GE,Console(RJ-45)
S
WS-X4013+TS Catalyst 4503 SupII-Plus-TS, 12 10/100/1000
PoE+8 SFP slots
S
WS-X4014 Supervisor Engine III S
WS-X4515 Catalyst 4500 Supervisor IV (2
GE),Console(RJ-45)
S
WS-X4516 Catalyst 4500 Supervisor V (2
GE),Console(RJ-45)
S