Support Information for Alcatel-Lucent Devices
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
26
Cisco Active Network Abstraction VNE Reference Guide, Version 3.6 SP1
OL-14763-02
Note For detailed information about the specific technologies and attributes supported by this NE, see
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Technologies, page 26.
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Technologies
The following technologies are supported by Alcatel-Lucent CBX 500, GX 550, B-STDX 9000
switches in Cisco ANA 3.6 SP1:
• Base Logical Components, page 28
• Layer 1, page 28
• IP, page 29
• Physical Equipment, page 31
• ATM, page 33
• Frame Relay, page 35
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Service Events
Table 16 lists the supported service events for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000
switches in Cisco ANA 3.6 SP1.
BIO3-OC48-1 BIO3 OC48c PHY S
GCHN-E1T1-32 Granite Topaz Channalized E1/T1 card S
BIO-OSU-1 BIO OSU PHY sub-card 1 port S
BIO-OSU-4 BIO OSU PHY sub-card 4 port S
PON-DS1-4 PON DS1 UNI sub-card 4 port S
PON-DS1-8 PON DS1 UNI sub-card 8 port S
PON-R1ETHER-1 PON R1.0 Ethernet UNI sub-card 1 port S
PON-R2ETHER-1 PON R2.0 Ethernet UNI sub-card 1 port S
Table 15 Supported Modules for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
Module Name Module Description
Certification
Level
Tab l e 16 Service Events for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
Event Name Expedited
interface status down/up N
card in/out N
link down/up N