Chapter 2 Camera Installation
Installing the IP Camera with a Vandal Resistant Enclosure
Step 10 While viewing video from the IP camera, perform the following steps to adjust the
a.Grip the two tilt adjustment screws and pan the IP camera left or right.
b.Loosen the two tilt adjustment screws, tilt the IP camera, then tighten the screws.
c.Rotate the IP camera to adjust the horizontal orientation until you achieve a level image.
Step 11 (Optional) If the IP camera is installed in a high humidity environment, remove the wrapper from the included silica gel pack and place the pack with the camera inside the VR housing. Ensure that the silica gel pack does not obstruct the IP camera field of view.
Step 12 Install the black cover.
Step 13 Attach the dome cover to the camera by aligning it with the mounting holes.
Cisco Video Surveillance 6030 IP Camera Installation Guide
|
| |
|
