Chapter 4 Camera Management
Powering the IP Camera On or Off
Step 7 (Optional) Click Auto Focus to have the IP camera automatically adjust its focus. To automatically adjust the focus to a particular region in the field of view, check the Specify Region check box and draw or select a region before clicking Auto Focus.
Powering the IP Camera On or Off
The IP camera does not include an on/off switch. You power it on or off by connecting it to or disconnecting it from a power source. When you power off the IP camera, configuration settings are retained.
To power on the IP camera, take either of these actions:
•Use an STP (shielded twisted pair) Category 5 or higher network cable to connect the IP camera to a network switch that provides 802.3af compliant PoE.
•Use an optional 12 VDC or 24VAC power adapter to connect the IP camera to a wall outlet
To power off the IP camera, take either of these actions:
•If the IP camera is receiving PoE, disconnect the network cable
•If the IP camera is receiving power through the power adapter, unplug the adapter from the wall or disconnect it from the camera
Resetting the IP Camera
You reset the IP camera by pressing the Reset button on the IP Camera (see Figure
You also can also perform these reset operations from the Maintenance Settings window as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide.
Table | Resetting the IP Camera |
| |
|
|
|
|
Reset Type |
| Procedure | Remarks |
|
|
|
|
Reboot. |
| Press and immediately release | This action is equivalent to |
|
| the Reset button. | powering the IP camera down |
|
|
| and then powering it up. Settings |
|
|
| that are configured for the IP |
|
|
| camera are retained. |
|
|
|
|
Factory reset. |
| Press and hold the button for at | Sets all IP camera options to |
|
| least 15 seconds. | their default values. After you |
|
|
| perform this procedure, follow |
|
|
| the steps in the “Performing the |
|
|
| Initial Setup of the IP Camera” |
|
|
| section on page |
|
|
|
|
Cisco Video Surveillance 6030 IP Camera Installation Guide
|
| |
|
